Hydraulic Hoist Linkage for Coal Mining Under the Ground 2
It is a new type equipment for the breakdown and assembling of fully mechanized equipment under the mine. It can breakdown and assemble the fully mechanized equipment under mine quickly and safely with the hydraulic control instead of the electric hoist manual control,which makes the operating...
Hydraulic lifting device for mining
(hydraulic hoist linkage for mining 2)
It is a new type equipment for the breakdown and assembling of fully mechanized equipment under the mine.
It can breakdown and assemble the fully mechanized equipment under mine quickly and safely with the hydraulic control instead of the electric hoist manual control, which makes the operating process mechanized and semi-mechanized and helps reducing the labor intensity, increasing the security, and makes sure the mines work fast and have a highly efficient semi-brake.
Range of application
This equipment is for
Breakdown and assembly of the hydraulic support under mine
Breakdown and assembly of other fully mechanized equipment, like the coal cutter, conveyor, reversed loader.
As the loader for other equipment and spare parts.
ZYQ-12×4/3 extra weight
Max lifting height（mm）
Max lifting weight（t）
（Length x Width x Height）
Fit bracket type
Weight less than 68t、min height less than 3m、width 1.75m、stull needs turn over and spinning
Weight less than 38t、min height less than 2.6m、width 1.75m、stull needs turn over and spinning
Weight less than 26t、min height less than 2m、width 1.5m、stull needs turn over and spinning
Weight less than 26t、min height less than 2m、width 1.5m、 stull doesn’t need to turn over and spinning
（Length x Width x Height）
Whole weight kg
1、Q: What are the main usages of hydraulic lifting devices for mines?
A: It is mainly used for the decomposition and assembly of hydraulic brackets under the mine. It also applies to coal miners and conveyors, decomposition and assembly of transporters
2、Q: What are the advantages of hydraulic lifting devices for mines?
A: The device uses intelligent hydraulic control system instead of artificial operating system. It can work independently without attaching to any device, reducing labor intensity and improving safety to ensure working efficiency.
3、Q: Is the hydraulic lifting device for mines large in size? Is it convenient to enter the mine?
A: The device can reduce the volume to 4.1 * 1.5 * 2.3m and enter the mine in a compressed state.
4、Q: How many parts are there in the hydraulic lifting device used in mines?
A: Walking feet, hydraulic lifting cylinders, folding chains, various bolts and nuts, transport vehicles, top beams, columns,hydraulic console, etc..
5、Q: How do I install and dismantle the hydraulic bracket for mine lifting device?
A: The hydraulic bracket is transported to the chamber formed by the equipment ,the chain and hook on the equipment are used to realize the movement of hydraulic bracket
6、Q: Why is the hydraulic lifting device used in mines called "Transformers"?
A: With the assistance of a transport vehicle, the device can be reduced and enlarged without affecting its use.It is convinient for transportion and access to mines
7、Q: What is the working principle of the hydraulic lifting device for mining?
A: The device is operated by a hydraulic control system, which replaces the manual installation and decomposition of hydraulic brackets and realizes the underground mine mechanization and automation